Wellhead Flange Face Reforming
Corroded, pitted wellhead flange face reformed cold to a flat sealing profile, restoring the gasket seal without pulling the spool.
What was failing
A wellhead flange face corrodes and pits where the gasket seats, and once the sealing surface loses its flat, continuous profile the gasket no longer makes up tight. Product weeps past the joint, the connection cannot be trusted to hold, and the usual fix is to cut the flange out and weld in a replacement. That means hot work on a live tie-in and pulling the spool, which is costly, slow, and disruptive to keep the wellhead in service. The owner needed the face back to a sound sealing surface without taking the spool out.
How AAS approaches it
We work the flange in place. First we machine the face clean to take off the corrosion product and open up the bottom of the pits so the repair has sound metal to key into. Then we cold-rebuild the face with a Belzona 1000 Series metal-repair composite, filling the pitting and the lost profile back up. We bring the rebuilt face down to a flat, even sealing surface that matches the gasket footprint, working cold so there is no hot work and no distortion of the spool. The gasket seats on a continuous surface again, and the joint makes up and holds.
Assess the face
We inspect the flange face to map the pitting and the corroded, low areas across the gasket seating surface.
Machine clean
We machine the face clean to remove corrosion product and open the pits down to sound metal so the rebuild keys in.
Cold-rebuild the face
We fill the pitting and lost profile with a Belzona 1000 Series composite, working cold with no hot work and no spool removal.
Reform to a sealing profile
We bring the rebuilt material down to a flat, even sealing surface that matches the gasket footprint.
Make up and return to service
We confirm the face is sound, the gasket is made up against a continuous surface, and the wellhead goes back into service.
The result
From the job
Repair and protection work of this kind, performed by AAS crews across Louisiana.
Capabilities used here
Where this work happens
Other projects
Storage Tank Floor Reclamation
Corroded aboveground tank floor rebuilt and lined back to immersion service without cutting out plate.
View project
Centrifugal Pump Rebuild & Efficiency Restoration
Cold-rebuilding an eroded pump casing and lining it to restore clearances, no new casting required.
View project
Live Pipe Leak Seal & Composite Wrap
Live leak sealed and a degraded process line reinforced with an engineered composite wrap, no welding and often no shutdown.
View project
Wastewater Clarifier & Concrete Structure Relining
Spalled, rebar-exposed concrete clarifier rebuilt and relined for continued immersion service.
View project
Heat Exchanger Water Box Protection
Blasting, metal rebuild, and a barrier coating restore a corroded exchanger water box and tube sheet in cooling-water service.
View projectHave equipment that needs to stay in service?
Tell us what is failing. We respond quickly, and we offer 24-hour on-call service.